Thanks for purchasing our frame gusset kit. You must first remove A-arms in order to install our gusset kit.
You must remove all paint, grease, or anything else that can contaminate weld. In front of rhino frame,
the gussets will be welded on the front side of the channeling as pictured to where the gussets point
towards front of vehicle, and in rear the gussets will all face towards the rear of vehicle as pictured as
well. As for gusset at lower end of firewall tubing, please look at picture to identify how it is installed.
There will be one more gusset located at the front A-arms, which is going to be the lower rear pick up
point on the front lower A-arm (pictured at bottom).